# sanad_api_r1 — copy to .env and fill in. docker compose reads it automatically.

# ── fleet server (REQUIRED — YS Lootah gives you these two) ──────────────────
SERVER_URL=https://fleet.example.com
DEVICE_TOKEN=REPLACE_WITH_DEVICE_TOKEN

# ── identity ─────────────────────────────────────────────────────────────────
# This robot's fleet id, sent in the telemetry body as "sn". Set the real R1 id.
SN=r1_0000

# ── DDS (reading robot state) ────────────────────────────────────────────────
# The R1 backpack link is eth10 (SanadR1 default). Use the interface that sees
# the robot's DDS traffic. Domain 0 unless your robot is configured otherwise.
DDS_INTERFACE=eth10
DDS_DOMAIN=0
# Which NIC's MAC to report as the robot identity (defaults to DDS_INTERFACE).
# MAC_INTERFACE=eth10

# ── status / position options ────────────────────────────────────────────────
# Read the loco FSM for a richer status (READ-ONLY GET RPC, never commands
# motion). 0 = derive status from battery + joint motion only (safe default).
R1_READ_FSM=0
# Position source: none (default) | rosbridge. The R1 localizes with stereo VSLAM
# on the ROS side; set 'rosbridge' + ROSBRIDGE_URL to report x,y from /odom.
R1_POSITION_SOURCE=none
ROSBRIDGE_URL=ws://127.0.0.1:9090

# ── fault thresholds ─────────────────────────────────────────────────────────
LOW_SOC=15
MOTOR_TEMP_MAX=85

# ── cadence / transport ──────────────────────────────────────────────────────
POLL_INTERVAL=2
VERIFY_TLS=1
HTTP_TIMEOUT=10

# ── robot identity card (shown on the dashboard) ─────────────────────────────
ROBOT_BRAND=unitree
ROBOT_TYPE=humanoid
ROBOT_MODEL=r1
# Optional: Sanad data dir whose size is reported in storage (as /host/<path>
# when the installer's read-only /:/host mount is used). Empty = omit.
STORAGE_DATA_PATH=